mortgageklion.blogg.se - Reolink ip camera

REOLINK IP CAMERA HOW TO
REOLINK IP CAMERA INSTALL

This may improve image clarity in high contrast situations, but it should be tested at different times of the day and night to ensure there is no negative effect. Optimizing brightness and contrast levels to compensate for differences between dark and bright objects using either BLC or WDR mode. Presets can be found in the Web UI of the camera. The sensitivity to set, a value between 1 (low sensitivity) and 50 (high sensitivity). Either all time schedule presets can be set at once, or a specific preset can be specified. Set the motion detection sensitivity of the camera. The Reolink integration supports all default camera services and additionally provides the following services: Service reolink_dev.set_sensitivity Be aware that this can be reset during a firmware upgrade. It might be disabled by default and can only be enabled when you have a screen connected to the NVR, not via webb or app clients.

Make sure ONVIF is enabled on your camera/NVR.

Make sure you have set up the Internal URL in Home Assistant to the correct IP address and port (do not use the mDNS name).

Users are created and managed through the web interface of the camera (Device Settings / Cog icon -> User) or through the app (Device Settings / Cog icon -> Advanced -> User Management). Users of type "Guest" can only view the switch states but cannot change them and cannot call the services. So when using https internally, motion detection will not work at this moment.įor the services and switch entities of this integration to work, you need a camera user of type "Administrator". The camera and other sensors will now be available as an entity.įor the motion detection to work, Home Assistant must be reachable via http from your local network. In your Home Assistant installation go to: Configuration > Integrations, click the button Add Integration > Reolink IP cameraĮnter the details for your camera.

Also clear your browser cache before proceeding to the next step, as the integration may not be visible otherwise. ⚠️ After executing one of the above installation methods, restart Home Assistant.

REOLINK IP CAMERA INSTALL

Click Install on the Reolink IP camera box that has now appeared.Paste the repository URL ( ) in the dialog box.Click the top right menu (the three dots).Click on HACS in the Home Assistant menu.

REOLINK IP CAMERA HOW TO

$ mv reolink_dev-master/custom_components/reolink_dev /config/custom_components/ HACS install ( How to install HACS)

# Move the reolink_dev directory into your custom_components directory in your Home Assistant install